6 GHz Bug Detector with Analog / Digital Switch

6 GHz Bug Detector

 

Bug Detector High Frequency 6 GHz



Protect Privacy and Confidential Information with our High Frequency RF Detector.

This Device Features a Detecting Frequency up to 6 GHz and Comes with an Analog/Digital Detection Switch. The Digital Feature Detects Bluetooth, WLAN, Wi-Fi, Cellular Phone and Digital Spread Spectrum Wireless Products.

When discovering a cellular phone or peeping camera, the LED will light from Level 1 to Level 2 to Level 3, and the beeping sound will change from SLOW to Rapid indicating the strength of detected signal.

VIBRATION warning mode, just the set switch to Silent. It will reduce the embarrassing of beep sound when scanning an environment. User also can detect by earphone hearing without others aware. Specially designed for easy and simple use, which does not require complicated installation or any professional knowledge.

 

This device has a new digital amplifier to heighten the indication for the digital signals of Blutooth, WLAN, WIFI, Cellular Phone and Digital Spread Spectrum wireless products.

We are amazed at the performance of this unit. We were able to detect cameras with the SH-055DV set at 94MHz up to 15' away, a 900MHz video transmitter with a 150' range was detected 9' away and a 2.4GHz video transmitter with a 60' range was detected 6' away.

The detecting range of this unit is from 50MHz to 6GHz or 6000MHz.

 

Analog Digital Select Switch

 

The signal of a Wireless Camera, Hidden Microphone and WalkiTalki or 2 Way Radio are analog. The signal of Bluetooth, WLAN, WIFI, Cellular Phone and Digital Spread Spectrum products are a digital signal.

 

Set the Analog Digital Switch to A to detect analog signals. The LED of the detector will light up without blinking and the buzzer will go off continuously.

 

When detecting digital signals the LED of the detector will be blinking and the buzzer will go off discontinuously and a small sound will occur. Switch the Analog Digital switch to D and the detector will have a stronger indication of digital signals.

The LED bar graph indicates the strength or proximity of the transmitter and a beep from a built in speaker will progress faster the closer you get to the transmitter.

There is also a battery low indicator that will illuminate when the batteries are low.

Specially Designed for Easy and Simple Use with no Complex Installation or Professional Knowledge Required.




Specifications:

• Digital/analog switch for signal strength
• 3 LED indicators to determine signal strength
• Signal strength audible alarm
• Vibration warning mode
• Silent alarm monitoring using earphones
• Sensitivity tuner
• 3V DC power (uses 2 AAA batteries, included)
• 50 MHz to 6.0 GHz

 

Wireless Camera Detection Range:

 

• 5.8 GHz from approximately 2 feet
• 2.4 GHz from approximately 5 feet


Cellular Phone Detection Range:




• Analog signals from approximately 20 feet
• Digital signals from approximately 40 feet

 

Includes:

• Earpiece
• Pocket clip

 

Size:


3 1/2" x 2 1/4" x 1"